Bryant PLUS 95S User Manual download pdf (Page 20)

GUIDE SPECIFICATIONS

General

System Description

Furnish a ______________________ 4--way multipoise gas--fired

condensing furnace for use with natural gas or propane (factory--

authorized conversion kit required for propane); furnish cold air

return plenum; furnish external media cabinet for use with

accessory media filter or standard filter .

Quality Assurance

Unit will be designed, tested and constructed to the current ANSI Z

21.47/CSA 2.3 design standard for gas--fired central furnaces.

Unit will be third party certified by CSA to the current ANSI Z

21.47/CSA 2.3 design standard for gas--fired central furnaces. Unit

will carry the CSA Blue StarR and Blue FlameR labels. Unit

efficiency testing will be performed per the current DOE test

procedure as listed in the Federal Register.

Unit will be certified for capacity and efficiency and listed in the

latest GAMA Consumer’s Directory of Certified Efficiency

Ratings.

Unit will carry the current Federal Trade Commission Energy

Guide efficiency label.

Delivery, Storage, and Handling

Unit will be shipped as single package only and is stored and

handled per unit manufacturer’s recommendations.

Warranty (for inclusion by specifying engineer)

U.S. and Canada only. Warranty certificate available upon request.

Equipment

Blower Wheel and ECM Blower Motor

Galvanized blower wheel shall be centrifugal type, statically and

dynamically balanced. Blower motor of ECM type shall be

permanently lubricated with sealed ball bearings, of _______hp,

and have infinitely variable speed from 250--1300 RPM operating

only when 24--VAC motor inputs are provided. Blower motor shall

be direct drive and soft mounted to the blower scroll to reduce

vibration transmission.

Filters

Furnace shall have reusable--type filters. Filter shall be ______ in.

(X) ________ in. An accessory highly efficient Media Filter is

available as an option. _____________ Media Filter.

Casing

Casing shall be of .030 in. thickness minimum, pre--painted

galvanized steel.

Plus 95s

Multi-- Stage/Variable Speed Gas Furnace

ECM Inducer

Motor

ECM Inducer motor shall be variable speed design, soft mounted

to assembly to reduce vibration transmission.

Primary Heat Exchangers

Primary heat exchangers shall be 3--Pass 20 gauge corrosion--

resistant aluminized steel of fold--and--crimp sectional design and

applied operating under negative pressure.

Secondary Heat

Exchangers

Secondary heat exchangers shall be of a flow--through design

having a patented interior laminate coating of polypropylene for

greater corrosion resistance with fold--and--crimp design and

applied operating under negative pressure.

Controls

Controls shall include a micro--processor--based integrated

electronic control board with at least 16 service troubleshooting

codes displayed via diagnostic flashing LED light on the control, a

self--test feature that checks all major functions of the furnace, and

a replaceable automotive--type circuit protection fuse. Multiple

operational settings available, including separate blower speeds for

low heat, medium heat, high heat, low cooling, high cooling and

continuous fan. Continuous fan speed may be adjusted from the

thermostat. Cooling airflow will be selectable between 350 or 400

CFM per ton of air conditioning. Features will also include

temporary reduced airflow in the cooling mode for improved

dehumidification when an Infinity Control or Thermidistat is

selected as the thermostat.

Operating Characteristics

Heating capacity shall be _________________ Btuh input;

______________ Btuh output capacity.

Fuel Gas Efficiency shall be 92.1 to 95% AFUE.

Air delivery shall be ________________ cfm minimum at 0.50 in.

wc. external static pressure.

Dimensions shall be: depth_________in.; width __________in.;

height___________in. (casing only). Height shall be

_________in. with A/C coil and _________________in. overall

with plenum.

Electrical Requirements

Electrical supply shall be 115 volts, 60 Hz, single-- phase (nominal).

Minimum wire size shall be ________AWG; maximum fuse size

of HACR--type designated circuit breaker shall be _________

amps.

Special Features

Refer to section of the product data identifying accessories and

descriptions for specific features and available enhancements.

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

E2009 Bryant Heating & Cooli ng Systems D 7310 W. Mo rris St. D Indianapolis, IN 46231 Printed in U.S.A. Edition Date: 09/09

Replaces: PDS355CAV.060.02

Catalog No. PDS355CAV.060.03

355CAV

1 2 ... 15 16 17 18 19 20

Comments to this Manuals

No comments

Bryant PLUS 95S User Manual Page 20

Comments to this Manuals

Related products and manuals for Water heaters & boilers Bryant PLUS 95S