Bryant PH13N User Manual

Browse online or download User Manual for Split-system air conditioners Bryant PH13N. Product Data - HVACpartners

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
MODEL PH13 SERIES C
SPLIT-SYSTEM HEAT PUMP UNIT
1 AND 3 PHASE
1-1/2 THRU 5 TON (018-060)
Product Data
FEATURES
AVAILABLE
Nominal sizes are available from 018 through 060 to
SIZES:
meet the needs of residential and light commercial
applications.
EFFICIENCY:
These heat pump systems provide economy of opera-
tion through energy conservation. They recover heat for
indoor comfort from outdoor air during the heating sea-
son and, by automatically reversing the refrigerant sys-
tem, remove indoor heat and excess humidity during the
cooling season.
CERTIFICATION:
All models are listed with UL (U.S. and Canada), ARI,
and CEC. The quality systems of this facility have been
Registered by UL to the ISO 9000 Series Standards.
ELECTRICAL
All units are offered in 208/230v, single phase, with
RANGE:
three-phase models in 048 and 060 sizes.
FAN MOTOR:
The totally enclosed fan motor means greater reliability
under rain conditions and dependable performance for
many years. Permanent split capacitor type motors pro-
vide more economical operation.
CABINET:
A weather protective cabinet of prepainted steel is pro-
tected underneath by a galvanized coating and treated
with a layer of zinc phosphate for a finish that will last for
many years. All screws on cabinet exterior are coated
for a long-lasting, rust-resistant, quality appearance.
UNIT DESIGN:
The copper tube, enhanced sine wave, aluminum fin
coil is designed for optimum heat transfer. Vertical air
discharge carries sound and hot condenser air up and
away from adjacent patio areas and foliage. The base
pan is designed for easy removal of water, dirt, and
leaves.
COMPONENTS:
Includes a suction-tube accumulator that minimizes the
amount of liquid refrigerant reaching the compressor; a
low-pressure switch that stops the compressor if refrig-
erant charge is lost; a crankcase heater to keep the
compressor oil warm and free of refrigerant for maxi-
mum lubricity (060 size); an internal compressor relief
valve on 030-060 sizes.
DEFROST
Incorporates a defrost relay, defrost timer, and low-
CONTROL
voltage terminations. The defrost control is a time/
BOARD:
temperature initiation/termination control which
includes 3 field-selectable time periods of 30, 60, and
90 minutes.
COMPRESSOR:
Designed specifically for heat pump duty, with energy
efficiency during heating and cooling operation. Each
compressor is hermetically sealed against contamina-
tion to assure long life and dependable performance
and externally mounted on rubber isolators for quiet
operation. Continuous compressor operation is
approved down to –30°F (–34.4°C) in the heating mode
and down to 55°F (12.8°C) in the cooling mode. (See
heating and cooling performance tables.) For improved
serviceability, all models are equipped with a compres-
sor terminal plug.
SERVICE
Both service valves are brass, front seating type
with sweat connections. Valves are externally located so
refrigerant tube connections can be made quickly and
easily. Each valve has a service port for ease of check-
ing operating refrigerant pressures.
SERVICEABILITY:
One access panel provides access to electrical controls.
Removal of top gives access to fan motor, compressor,
and condenser coil.
LIMITED
Single phase: 5 years on parts and 5 years on com-
WARRANTY:
pressor. Three phase: 1 year on parts and 5 years on
compressor.
VALVES:
Page view 0
1 2 3 4 5 6 ... 15 16

Summary of Contents

Page 1 - Product Data

MODEL PH13 SERIES CSPLIT-SYSTEM HEAT PUMP UNIT1 AND 3 PHASE1-1/2 THRU 5 TON (018-060) Product Data FEATURES AVAILABLE Nominal sizes are available fro

Page 2 - SHOWN IN DRAWING

—10—PH13 DETAILED COOLING CAPACITIES* Continued See notes on page 12. EVAPORATOR AIRCONDENSER ENTERING AIR TEMPERATURES °F85 95 105 115 125CFM EWBCap

Page 3 - SPECIFICATIONS

—11—PH13 DETAILED COOLING CAPACITIES* Continued See notes on page 12. EVAPORATOR AIRCONDENSER ENTERING AIR TEMPERATURES °F85 95 105 115 125CFM EWBCap

Page 4 - SPECIFICATIONS Continued

—12—PH13 DETAILED COOLING CAPACITIES* Continued NOTE: When the required data fall between the published data, interpolation may be performed. Extrapo

Page 5 - ISO 9001:2000

—13—PH13 HEAT PUMP HEATING PERFORMANCE INDOOR AIROUTDOOR COIL ENTERING AIR TEMPERATURES °F–3 7 172737475767CapacityMBtuhTotal PowerCapacityMBtuhTotal

Page 6

—14—PH13HEAT PUMP HEATING PERFORMANCE ContinuedINDOOR AIROUTDOOR COIL ENTERING AIR TEMPERATURES °F–3 7 172737475767CapacityMBtuhTotal PowerCapacityMB

Page 7

—15—PH13HEAT PUMP HEATING PERFORMANCE ContinuedINDOOR AIROUTDOOR COIL ENTERING AIR TEMPERATURES °F–3 7 172737475767CapacityMBtuhTotal PowerCapacityMBt

Page 8 - COMBINATION RATINGS

—16—© Payne Heating & Cooling Systems 7310 W. Morris St. Indianapolis, IN 46231 Printed in U.S.A. edition date: 04/06 Catalog No. SS-PH13-01Manufa

Page 9 - DETAILED COOLING CAPACITIES*

—2—PH136 . OPTIONAL DENSE GRILLE SHOWN IN DRAWING.

Page 10

—3—PH13 SPECIFICATIONS See notes on page 4. UNIT SIZE-SERIES 018-C 024-C 030-C 036-CELECTRICAL Unit Volts—Phase—Hertz 208/230—1—60Operating Voltage R

Page 11

—4—PH13 SPECIFICATIONS Continued * The ampacity of non-metallic (NM) sheathed cable shall be that of 60°C (140°F) conductors per NEC 1999, Article 3

Page 12

—5—PH13 RECOMMENDED TUBE DIAMETERS * For tube set over 80 ft horizontal and/or 20 ft vertical differential, consult Residential Split System Long-Lin

Page 13 - HEAT PUMP HEATING PERFORMANCE

—6—PH13 OPTIONAL EQUIPMENT USAGE GUIDELINE * For tubing line sets between 80 and 175 ft, refer to Residential’s Split Systems Long-Line Application G

Page 14

—7—PH13 OPTIONAL EQUIPMENT DESCRIPTION AND USAGE (Listed Alphabetically) Continued 8. Filter Drier A device for removing contaminants from refrigeran

Page 15 - SYSTEM DESIGN

—8—PH13 COMBINATION RATINGS * Outdoor section/indoor section combination tested in accordance with DOE test procedures for heat pumps. Ratings for ot

Page 16

—9—PH13 DETAILED COOLING CAPACITIES* See notes on page 12. EVAPORATOR AIRCONDENSER ENTERING AIR TEMPERATURES °F85 95 105 115 125CFM EWBCapacityMBtuh†

Comments to this Manuals

No comments